LED Dust Sensor for Vacuum Cleaner
PM1009PM1009

The LED dust sensor PM1009 adopts the infrared correlation principle, can accurately measure 4-channel particle count for different particle size for 10μm-60μm, 60μm-180μm, 180μm-500μm and >500μm which pass through vacuum cleaner's vacuum pipe or vacuum extension rod pipe, etc. (Note1)

Product Inquiry

Features

Easy integration to customer device;
4-channel particle count output for different particle size range: 10μm-60μm, 60μm-180μm, 180μm-500μm and 500μm;
Quick response;

Specifications

	CO2 Sensor CM1106-C
Operating principle	LED infrared
Measurement range	0-10000pcs
Measurement channel	10μm-60μm, 60μm-180μm, 180μm-500μm, 500μm
Response time	0.5s
Working temperature	-10~60℃; 0~95%RH (non-condensing)
Storage temperature	-20~80℃; 0~95%RH (non-condensing)
Power supply	DC 3.3V±5%, ripple <50mV
Working current Average	<60mA
Signal output UART	3.3V level
Dimension	Main control PCBA ( L26.5W16.0H1.0 mm) Transmitter & receiver board(L20 *W10.56 mm)

Note 1:
- Vibration mitigation measures such as rubber gaskets should be taken to avoid vibration when installing the transmitting and receiving parts;
- The fixed installation should be 180° between the transmitting part and receiving part;
- The distance between transmitting part and receiving part should be less than or equal to 60mm;
- When dust contaminates the lens of receiving part,it can be wiped by medical cotton swab soaked in water and then with a dry swab to wipe it again.Do not use alcohol.