• Contact
    fix6.png
    Home > Product > Gas Analyzer
    Online Infrared Syngas Analyzer Gasboard 3100 & 3100 PRO.png

    Online Infrared Syngas Analyzer
    Gasboard 3100 & 3100 PROGasboard 3100 & 3100 PRO

    PCT approved Gasboard-3100 is a stationary syngas analyzer based on NDIR & TCD technologies,  NDIR ,TCD and electrochemical technology, it can be used for long term measurement of CO, CO2, CH4, H2 , O2 , CnHm, C2H2 , C2H4 or any of their combination and calculation of heat value.
    With standard 3U enclosure and 4-20mA output, it is widely integrated for long term gas monitoring in applications like steam reforming, hydrogen production, methanol production, steel making, heat treatment, chemical conversion, gasification, pyrolysis etc.
    Gasboard syngas series analysis instruments can be used for measurement of the concentration of up to 6 gases such as  CO, CO2, H2, O2, CH4, CnHm, C2H2 and C2H4 simultaneously, and calculate the gas heating value (caloric value) and N2 balance automatically. It is the best tool to help you:
    ? To check whether the gas is still being produced to decide the feedstock cycle and the best ratio.
    ? To check the quality of the gas being produced prior to use in some industrial process.
    ? To check the quality of the gas and optimize the gasification technical process.
    Show More

    Features

    • PCT approved product based on IR & TCD technologies to measure syngas composition. (EU and US Authorization No.: EP2796856, US9857323).
    • Replacement to gas chromatography, mass spectrometry.
    • Patented NDIR and TCD technology, including ECD technology for reliable measurement of eight gases.
    • High-selectivity CH4 gas sensor, no interference from other hydrocarbons.
    • Fully compensated H2 sensor, no interference from CO, CO2, CH4 based on the intelligent correction.
    • Integrated RS232/RS485 digital output with 4-20mA analog output.
    • Built-in auto-zero pump, efficiently decrease the calibration frequency.
    • Modular sensor design , easy maintenance.
    Applications:
    • Energy: Gasification of biomass/municipal waste/solid waste/coal
    • Pyrolysis of tyre/plastic
    • Pertrochemical:Methanol Production,Hydrogen Production
    • Metallurgy:Direct Iron Reduction,Converter,Coking Process,Blaste Furnace,Heat Treatment
    • Oil& Gas:Natural Gas,Coal Bed Gas

    Specifications

    CO2 Sensor CM1106-C
    Display LCD Display
    Power Supply 100~240VAC，100W
    Communication RS-485/RS-232，(4-20) mA
    Gas Condition No Tar, No Dust and No Water
    Inlet Gas Pressure (2~50) kPa
    Optimal flow Rate (0.7~1.2) L/min
    Response time T90＜15s (NDIR)
    Repeatability ≤1%
    Resolution 0.01%
    Accuracy CO/CO2/CH4/C2H2/C2H4/CnHm：±1%F.S.br/> O2/H2：±2%F.S.
    Measurment Range CO/CO2/CH4/H2:(0~100)%br/> O2：(0~25)%br/> C2H2/C2H4/CnHm：(0~10)%（optional）
    Measurment Principle CO/CO2/CH4/C2H2/C2H4/CnHm：NDIR
    H2：TCD
    O2：ECD
    Gas CO/CO2/CH4/H2/O2/C2H2/C2H4/CnHm*/Heat Value
    Show More

    You can contact Cubic by telephone or email, or you can submit an online Request for Quotation Form.

    For Sales: sales@

    For Administration: info@hpkmalatang.com

    Required*
    Send
    CONTACT SALES
    This website uses cookies to improve your user experience. By using this site, you consent to the use of cookies. You can find more information in our Privacy Policy.